-
浔之漫智控技术（上海）有限公司
主营：西门子低压电器授权代理商,西门子PLC模块总代理商,西门子模块总代理商,西门子中国一级代理商,西门子PLC一级代理商,西门子DP电缆代理商
浔之漫智控技术（上海）有限公司
主营：西门子低压电器授权代理商,西门子PLC模块总代理商,西门子模块总代理商,西门子中国一级代理商,西门子PLC一级代理商,西门子DP电缆代理商
4
6GK7443-1EX30-0XE0西门子通信处理器
6GK7443-1EX30-0XE0西门子通信处理器
6GK7443-1EX30-0XE0西门子通信处理器
STARTER 调试工具操作简便，可用于：
调试
优化
故障诊断
该软件可作为独立 PC 应用软件运行，也可作为与 TIA 兼容的程序集成在 SIMATIC STEP 7 中或集成到 SCOUT 工程组态系统中（适用于 SIMOTION）。其基本功能和操作在两种情况下是相同的。
除 SINAMICS 变频器外，STARTER 还可支持 MICROMASTER 4 装置。
使用项目向导，可以将驱动系统添加到项目结构树中。
面向解决方案的对话窗导航功能可以向初学者提供支持，同时，标准图形化显示功能可在设置驱动参数时帮助直观理解。
调试由向导功能进行引导，该向导可完成传动中的所有基本设置。因此，作为传动组态过程的一部分，只需设置一些传动参数，便可启动和运行电机。
所需具体设置使用图形化参数化界面，界面也可精确显示传动运行原理。
可独立设置的示例包括：
如何使用端子
总线接口
设定值通道（例如，固定设定值）
闭环转速控制（例如，斜坡函数发生器、限值等）
BICO 互连
故障诊断
*们可以使用*列表明确、快速地随时访问具体参数。对常用参数的具体编译可保存在**的用户列表和监控表中。
此外，还有下列功能可用于优化：
控制器设置的自优化（取决于驱动设备）
设置和评估跟踪记录 1)
用于记录 2 × 8 个信号的工具功能
测量光标功能
大量触发功能
多个 Y 刻度
当前控制器周期时钟内的采样时间
诊断功能提供以下信息：
控制/状态字
参数状态
运行条件
通信状态
操作方便：只需进行少量设置就可成功进行调试：电机开始运转
面向解决方案的对话框用户引导功能可使调试过程得以简化
自优化功能可减少手动优化所用的时间
必须满足以下低系统要求：
硬件
采用 Pentium III 处理器的编程器或 PC，处理器速度至少 1 GHz（建议 > 1 GHz）
工作存储器 2 GB（建议 4 GB）
屏幕分辨率 1024×768 像素，16 位色深
可用硬盘空间：小 5 GB
软件
Microsoft Internet Explorer V6.0 或更高版本
64 位操作系统：
Microsoft Windows Server 2016
Microsoft Windows Server 2019
Microsoft Windows 10 Pro
Microsoft Windows 10 Enterprise
STARTER（V5.1 SP1 及更高版本）可安装在虚拟机中。为此，请选择可使用下面*版本或较新版本的虚拟平台：
VMware vSphere Hypervisor (ESXi) 6.7
VMware Workstation pro V16.1.x
VMware Player V16.1.x
Microsoft Windows Server 2016 Hyper-V
使用以下来宾操作系统，可以在所选的虚拟化平台中安装 STARTER：
Windows 10 Professional/Enterprise（64 位）
1) 取决于驱动装置。不支持 MICROMASTER 4、SINAMICS G110、SINAMICS G120（固件版本 <V4.4）、SINAMICS G110D 和 SINAMICS G120D（固件版本 <V4.5）。
可通过 PROFIBUS 或 PROFINET/以太网或串行接口来交换数据。
为了执行编程和维护，可通过 PROFIBUS 将编程器/PC 连接到 CU320-2 控制单元。必须使用连接电缆在编程器/PC 上进行 PROFIBUS 连接。
而且，也可以通过以太网、CBE20 通信板（可选）或 CU320-2 控制单元上的以太网接口 -X127 建立 CU320-2 控制单元和编程器/PC 之间的连接。
注：
端子排 -X127 适合于与编程器/PC 之间的通信连接，仅用于维修和调试。
Description | Article No. |
|---|---|
STARTER commissioning tool for SINAMICS and MICROMASTER English, French, German, Italian, Spanish | 6SL3072-0AA00-0AG0 |
Note:
In addition to the STARTER commissioning tool, SINAMICS Drive Control Chart (SINAMICS DCC) can be installed. This allows the device functionality in the SINAMICS drive system to be expanded with dedicated technology functions as required.
Further information about SINAMICS DCC can be found in the section SINAMICS DCC (Drive Control Chart) with STARTER.
Depending on the version of the Control Unit (CU), the Control Unit of the drive unit can communicate with the programming device (PG) or PC via PROFIBUS or PROFINET/Ethernet or via a serial interface. The following accessories are available for the particular drive system as listed in the following table.
Description |
| Recommended accessories For communication between the drive unit and the programming device or PC |
|---|---|---|
|
| Article No. |
MICROMASTER 4 | ||
RS232 | PC converter connection kit | 6SE6400-1PC00-0AA0 |
PROFIBUS | SIMATIC DP plug-in cable 12 MBaud, for PG connection, pre-assembled with 2 × 9‑pin SUB D connector, 3 m (9.84 ft) | 6ES7901-4BD00-0XA0 |
SIMATIC ET 200pro FC‑2 | ||
USB | PC converter connection kit 2 Mini USB interface cable for communication with a PC, 3 m (9.84 ft) | 6SL3255-0AA00-2CA0 |
PROFIBUS | Connection to the PROFIBUS system in the plant | See supplementary products 1) |
PROFINET/ Ethernet | Connection to the PROFINET system in the plant | See supplementary products 1) |
SINAMICS G110 | ||
RS232 | PC converter connection kit Scope of supply: | 6SL3255-0AA00-2AA1 |
SINAMICS G120C | ||
USB | PC converter connection kit 2 Mini USB interface cable for communication with a PC, 3 m (9.84 ft) | 6SL3255-0AA00-2CA0 |
SINAMICS G120 | ||
USB | PC converter connection kit 2 Mini USB interface cable for communication with a PC, 3 m (9.84 ft) | 6SL3255-0AA00-2CA0 |
PROFIBUS | SIMATIC DP plug-in cable 12 MBaud, for PG connection, pre-assembled with 2 × 9‑pin SUB D connector, 3 m (9.84 ft) | 6ES7901-4BD00-0XA0 |
PROFINET/ Ethernet | Standard CAT5 Ethernet cable or PROFINET cable | – |
SINAMICS G110M | ||
USB | PC converter connection kit 2 Mini USB interface cable for communication with a PC, 3 m (9.84 ft) | 6SL3255-0AA00-2CA0 |
PROFIBUS | Connection to the PROFIBUS system in the plant | See supplementary products 1) |
PROFINET/ Ethernet | Connection to the PROFINET system in the plant | See supplementary products 1) |
SINAMICS G110D | ||
Optical USB | USB interface cable For communication with a PC, 2.5 m (8.2 ft) | 6SL3555-0PA00-2AA0 |
SINAMICS G120D | ||
USB | PC converter connection kit 2 Mini USB interface cable for communication with a PC, 3 m (9.84 ft) | 6SL3255-0AA00-2CA0 |
PROFIBUS | Connection to the PROFIBUS system in the plant | See supplementary products 1) |
PROFINET/ Ethernet | Connection to the PROFINET system in the plant | See supplementary products 1) |
SINAMICS S110 | ||
RS232 | SIMATIC S7 connecting cable Null modem cable, 6 m (19.69 ft) | 6ES7901-1BF00-0XA0 |
PROFIBUS | CP 5711 communication module USB adapter for connecting a PG or notebook to PROFIBUS or MPI | 6GK1571-1AA00 |
SIMATIC DP plug-in cable 12 MBaud, for PG connection, pre-assembled with 2 × 9‑pin SUB D connector, 3 m (9.84 ft) | 6ES7901-4BD00-0XA0 | |
PROFINET/ Ethernet | Standard CAT5 Ethernet cable or PROFINET cable | – |
SINAMICS S120 | ||
RS232 | SIMATIC S7 connecting cable Null modem cable, 6 m (19.69 ft) | 6ES7901-1BF00-0XA0 |
PROFIBUS | CP 5711 communication module USB adapter for connecting a PG or notebook to PROFIBUS or MPI USB cable (2 m (6.56 ft)) included in scope of supply | 6GK1571-1AA00 |
SIMATIC DP plug-in cable 12 MBaud, for PG connection, pre-assembled with 2 × 9‑pin SUB D connector, 3 m (9.84 ft) | 6ES7901-4BD00-0XA0 | |
PROFINET/ Ethernet | Standard CAT5 Ethernet cable or PROFINET cable | – |
SINAMICS S150 | ||
PROFIBUS | CP 5711 communication module USB adapter for connecting a PG or notebook to PROFIBUS or MPI USB cable (2 m (6.56 ft)) included in scope of supply | 6GK1571-1AA00 |
SIMATIC DP plug-in cable 12 MBaud, for PG connection, pre-assembled with 2 × 9‑pin SUB D connector, 3 m (9.84 ft) | 6ES7901-4BD00-0XA0 | |
PROFINET/ Ethernet | Standard CAT5 Ethernet cable or PROFINET cable | – |
SINAMICS G130 | ||
PROFIBUS | CP 5711 communication module USB adapter for connecting a PG or notebook to PROFIBUS or MPI USB cable (2 m (6.56 ft)) included in scope of supply | 6GK1571-1AA00 |
SIMATIC DP plug-in cable 12 MBaud, for PG connection, pre-assembled with 2 × 9‑pin SUB D connector, 3 m (9.84 ft) | 6ES7901-4BD00-0XA0 | |
PROFINET/ Ethernet | Standard CAT5 Ethernet cable or PROFINET cable | – |
SINAMICS G150 | ||
PROFIBUS | CP 5711 communication module USB adapter for connecting a PG or notebook to PROFIBUS or MPI USB cable (2 m (6.56 ft)) included in scope of supply | 6GK1571-1AA00 |
SIMATIC DP plug-in cable 12 MBaud, for PG connection, pre-assembled with 2 × 9‑pin SUB D connector, 3 m (9.84 ft) | 6ES7901-4BD00-0XA0 | |
PROFINET/ Ethernet | Standard CAT5 Ethernet cable or PROFINET cable | – |
SINAMICS DCM | ||
PROFIBUS | CP 5711 communication module USB adapter for connecting a PG or notebook to PROFIBUS or MPI USB cable (2 m (6.56 ft)) included in scope of supply | 6GK1571-1AA00 |
SIMATIC DP plug-in cable 12 MBaud, for PG connection, pre-assembled with 2 × 9‑pin SUB D connector, 3 m (9.84 ft) | 6ES7901-4BD00-0XA0 | |
SINAMICS DCM Cabinet | ||
PROFIBUS | CP 5711 communication module USB adapter for connecting a PG or notebook to PROFIBUS or MPI USB cable (2 m (6.56 ft)) included in scope of supply | 6GK1571-1AA00 |
SIMATIC DP plug-in cable 12 MBaud, for PG connection, pre-assembled with 2 × 9‑pin SUB D connector, 3 m (9.84 ft) | 6ES7901-4BD00-0XA0 | |
1) An overview of all the supplementary products (e.g. cables and connectors) that are available for the distributed converter family can be found at the following link: //www./distributeddrives-supplementaryproducts
6GK7443-1EX30-0XE0西门子通信处理器 6GK7443-1EX30-0XE0西门子通信处理器