西门子XB216 6GK5216-0BA00-2AB2交换机

Automatic Door Control Systems for Industrial Applications

The product-specific application/requirement lies in complying with the special industrial requirements concerning functional safety and door-closing mechanisms. Protective machine doors and power-operated doors and gates comply with the EN ISO 13849-1 safety standard.

1-button operation for the entire commissioning process

Optimum and stable drive characteristics

Reduced service requirements and costs

SIDOOR User Software (part of the Software Kit, not included in the scope of delivery, see "Additional units") enables user-friendly operation and detailed diagnostics.

Integrated terminal module enables simple setup and diagnostics via an event and statistics memory

Integrated relay module for the "OPEN" position, "CLOSED" position and "Reversing" functions.

Small footprint thanks to compact design

Automated functions for enhanced safety

The door drive system consists of a controller and a maintenance-free drive unit, the geared motors.

Controllers are electronic controllers connected to the power supply via an external power supply unit. They are generally connected to the higher-level controller via digital or fieldbus interfaces, and can be configured via a user interface.

These controllers are available for selection for industrial applications:

SIDOOR ATD401W, digital I/O, masses of up to 700 kg

SIDOOR ATD420W, connected to the higher-level controller via PROFIBUS interface, masses of up to 700 kg

SIDOOR ATD430W, connected to the higher-level controller via PROFINET interface, masses of up to 700 kg

The safe functions – force limitation, energy limitation and end position detection – fulfill the requirements according to EN ISO 13849-1 for Category 2 and Performance Level d. The drives are suitable for power-operated rds according to EN ISO 14120

Geared motors form the maintenance-free drive unit in the door drive. The geared motors are DC motors with non-self-locking gearing, and are speed-controlled. The set force and speed limits are not exceeded.

Operation of the named door drives does not require limit switches. The door width and the "OPEN"/"CLOSE" positions are determined automatically.

The power is transmitted by a toothed belt. The toothed belt passes over a deflector pulley and can be fitted with 2 door clutch holders. This enables it to drive both one-sided and centrally-opening doors. The accessories are not included in the scope of supply, see "Additional units".