SIEMENS西门子模块6ES7141-3BH00-0XA0

General information

Product type designation

ECC 2x PWM ST

ECC PL ST

HW functional status

1

1

Firmware version

V1.04

V1.1

● FW update possible

Yes

Product description

Technology modules for the conductive AC charging of electric vehicles according to IEC 61851

Communication controller for controlling conductive AC charging according to IEC 61851

Technology module for the conductive charging of electric vehicles according to DIN 70121

usable BaseUnits

BU type B0, B1

Color code for module-specific color identification plate

CC40

Number of channels

2; Acc. to IEC 61851-1 Mode 3 and/or SAE J1772

2; According to IEC 61851/SAE J1772

1; Acc. to IEC 61851-1 Mode 4 and DIN SPEC 70121

Product function

● I&M data

Yes; I&M0 to I&M3

● Isochronous mode

No

Engineering with

● STEP 7 TIA Portal configurable/integrated from version

V14 SP1

STEP 7 V16 or higher

Installation type/mounting

Mounting type

standard rail

Mounting position

Horizontal

Horizontal, vertical

Supply voltage

Type of supply voltage

DC

Rated value (DC)

24 V

permissible range, lower limit (DC)

19.2 V

permissible range, upper limit (DC)

28.8 V

Reverse polarity protection

Yes; against destruction

Load voltage L+

● Rated value (DC)

24 V

24 V

● permissible range, lower limit (DC)

19.2 V

● permissible range, upper limit (DC)

28.8 V

● Reverse polarity protection

Yes

Input current

Current consumption, typ.

40 mA

Current consumption, max.

90 mA

100 mA

Digital inputs

Number of digital inputs

2; 1 per channel

0

Digital inputs, parameterizable

Yes; 12 V / 24 V

No

Digital input functions, parameterizable

● Freely usable digital input

No; Readback contact contactor / connector lock

Input voltage

● Type of input voltage

DC

● for ** "0"

<0.2 V (nom)

● for ** "1"

>0.6 V (nom)

● permissible voltage at input, min.

0 V

● permissible voltage at input, max.

30 V

Cable length

● shielded, max.

10 m

● unshielded, max.

30 m

Digital outputs

Type of digital output

Transistor

Number of digital outputs

2; 1 per channel

2; 1x digital out TRIP function as open collector, 1x digital out (DQ P) as open collector

Current-sinking

Yes

short-circuit proof

Yes

Short-circuit protection

Yes; electronic/thermal

Digital output functions, parameterizable

● PWM output

Yes; According to IEC 61851

Yes; Acc. to DIN SPEC 70121

— Number, max.

2; 1 per channel

1; 1 per channel

— Cycle duration, parameterizable

No; 1 kHz

● Connection of a DC motor

Yes; ACT p/n connector locking

No; Only fixed charging cables are permitted for DC charging systems

Switching capacity of the outputs

● with resistive load, max.

1.3 A

0.6 A; Per digital output

Output voltage

● Type of output voltage

DC

● Rated value (DC)

24 V

Cable length

● unshielded, max.

30 m; when using a PROFIBUS line

30 m

10 m

Analog outputs

Number of analog outputs

2; Control pilot acc. to IEC 61851-1 and/or SAE J1772

1

Type of analog output

Control pilot including Powerline Green Phy, acc. to DIN SPEC 70121

Connection of a DC motor

Yes; Motor for connector lock

No

Protocols

Bus communication

Yes

Yes; Backplane bus

Vehicle communication according to IEC 61851

Yes; MODE 3

Yes; Mode 4

Interrupts/diagnostics/status information

Alarms

● Diagnostic alarm

Yes

Diagnoses

● Monitoring the supply voltage

No

No; Supply voltage diagnostics

● Wire-break

No

● Short-circuit

Yes

No

Diagnostics indication LED

● ERROR LED

Yes; red LED

No

● Monitoring of the supply voltage (PWR-LED)

Yes; green PWR LED

● Channel status display

Yes; green LED

● for module diagnostics

Yes; green/red DIAG LED

Potential separation

Potential separation channels

● between the channels

No

No; Only one channel is available

● between the channels and backplane bus

Yes

Isolation

Isolation tested with

707 V DC

Degree of pollution

2

EMC

Electrostatic discharge acc. to IEC 61000-4-2

4 kV contact discharge / 8 kV air discharge

Field-related interference acc. to IEC 61000-4-3

10 V/m (80 ... 1 000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz)

Conducted interference due to burst acc. to IEC 61000-4-4

2 kV ** lines

Conducted interference due to surge acc. to IEC 61000-4-5

On DC supply lines: 0.5 kV symmetrical and asymmetrical

Conducted interference due to high-frequency radiation acc. to IEC 61000-4-6

10 V (0.15 ... 80 MHz)

Degree and class of protection

IP degree of protection

IP20

Standards, approvals, certificates

Certificate of suitability

CE / RCM / EAC / UL / KC

CE

CE / RCM / EAC / UL / KC

Ambient conditions

Ambient temperature during operation

● min.

-30 °C

-30 °C

● max.

60 °C

60 °C

● horizontal installation, min.

-30 °C

-30 °C; = Tmin

-30 °C

● horizontal installation, max.

60 °C

60 °C; = Tmax

60 °C

● vertical installation, min.

-30 °C

-30 °C; = Tmin

-30 °C

● vertical installation, max.

50 °C

50 °C; = Tmax

50 °C

Ambient temperature during storage/transportation

● Storage, min.

-40 °C

● Storage, max.

70 °C

● Transportation, min.

-40 °C

● Transportation, max.

70 °C

Altitude during operation relating to sea level

● Installation altitude above sea level, max.

2 000 m

5 000 m

2 000 m

● Ambient air temperature-barometric pressure-altitude

Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m)

Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)

Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m)

Relative humidity

● Operation, min.

5 %

5 %

● Operation, max.

95 %; no condensation

95 %; no condensation

● With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation

Vibrations

● Vibration resistance during operation acc. to IEC 60068-2-6

10 ... 58 Hz / 0.075 mm, 58 ... 150 Hz / 1 g

Shock testing

● Shock resistance acc. to IEC 60068-2-27

15 g / 11 ms

Resistance

Coolants and lubricants

— Resistant to commercially available coolants and lubricants

Yes; Incl. diesel and oil droplets in the air

Use in stationary industrial systems

— to biologically active substances according to EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

— to chemically active substances according to EN 60721-3-3

Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *

— to mechanically active substances according to EN 60721-3-3

Yes; Class 3S4 incl. sand, dust, *

— Against mechanical environmental conditions acc. to EN 60721-3-3

Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)

Usage in industrial process technology

— Against chemically active substances acc. to EN 60654-4

Yes; Class 3 (excluding trichlorethylene)

— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04

Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)

Remark

— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04

* The supplied plug covers must remain in place over the unused interfaces during operation!

Conformal coating

● Coatings for printed circuit board assemblies acc. to EN 61086

Yes; Class 2 for high reliability

● Protection against fouling acc. to EN 60664-3

Yes; Type 1 protection

● Military testing according to MIL-I-46058C, Amendment 7

Yes; Discoloration of coating possible during service life

● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A

Yes; Conformal coating, Class A

Decentralized operation

to SIMATIC S7-1500

Yes

Dimensions

Width

20 mm

Height

73 mm

Depth

58 mm

Weights

Weight, approx.

32 g

51 g

Other

Note:

The Tone Mask of the Green Phy defined in DIN 70121 for North America applies