-
浔之漫智控技术（上海）有限公司
主营：西门子低压电器授权代理商,西门子PLC模块总代理商,西门子模块总代理商,西门子中国一级代理商,西门子PLC一级代理商,西门子DP电缆代理商
浔之漫智控技术（上海）有限公司
主营：西门子低压电器授权代理商,西门子PLC模块总代理商,西门子模块总代理商,西门子中国一级代理商,西门子PLC一级代理商,西门子DP电缆代理商
3
西门子6GK5208-0BA00-2AF2工业以太网交换机
西门子6GK5208-0BA00-2AF2工业以太网交换机
6GK5208-0BA00-2AF2 SCALANCE XF208，扁平， 管理式工业以太网交换机，8个 10/100 Mbit/s RJ45 端口， 错误信号触点含设置 按钮，冗余 电源，PROFINET IO 设备， 网络管理， 集成冗余管理器， 包括电子手册在 CD-ROM，可选配 C 型插头 |
6AT8000-1BB00-2XA0 SIPLUS CMS 硬件 IFN 模拟输入距离 检测模拟信号 "6*ADC； +/-20V；192kHz；IP67" |
The IFN ANALOGINPUT (IFN AI) and IFN ANALOGINPUT-DISTANCE (IFN AI-D) are two robust interface nodes for SIPLUS CSM4000:
For provision of analog measured data for further processing in combination with the CMS X‑Tools software (X‑Tools must be ordered separately, see "Analysis Software" → "CMS X‑Tools")
The IFN AI has a measuring range of -10 V to +10 V and the IFN AI-D has an extended voltage range of -20 V to +20 V.
Can be used for high-accuracy, continuous monitoring in harsh environments
Thanks to the rugged design and IP67 degree of protection, the IFN ANALOGINPUT is suitable for use in rough industrial environments.
The compact design permits applications in confined areas.
Easy handling facilitates efficient commissioning and maintenance.
The IFN ANALOGINPUT is a robust interface node for SIPLUS CMS4000, designed for detecting voltages (-10 V to +10 V) in the frequency range from 0 Hz to 40 kHz.
The IFN ANALOGINPUT is used for high-accuracy, continuous monitoring in harsh environments.
The fronts of the IFN AI and IFN AI-D feature:
LEDs for status display
Six connections for analog inputs (-10 V to +10 V, -20 V to +20 V)
Three connections for IEEE1394 bus system
One connection for power supply
Connection to the higher-level evaluation PC is via an IEEE1394 bus system operating at 400 Mbit/s.
The module can be mounted on an IEC rail or with mounting brackets.
The IFN ANALOGINPUT enables up to six analog **s (-10 V to +10 V) to be recorded.
The maximum sampling frequency is 192 kHz per channel.
Article number | 6AT8000-1BB00-0XA0 | 6AT8000-1BB00-2XA0 | |
|---|---|---|---|
SIPLUS CMS4000 Interface Node AI | SIPLUS CMS4000 Interface Node AI-D | ||
General information |
|
| |
Product type designation | IFN AI | IFN AI-D | |
Product description | up to six analog input **s can be measured with the IFN AI | up to six analog input **s can be measured with the IFN AI-D in the range of ±20 V | |
Installation type/mounting |
|
| |
Mounting type | standard rail | ||
Mounting accessories | Mounting bracket, can be ordered as option | ||
Required clearance |
|
| |
● for side-by-side mounting at the front | 80 mm | ||
● for side-by-side mounting at the top | 25 mm | ||
● for side-by-side mounting at the back | 25 mm | ||
Supply voltage |
|
| |
Design of the power supply | stabilized | ||
Rated value (DC) | 24 V | ||
permissible range, lower limit (DC) | 18 V | ||
permissible range, upper limit (DC) | 32 V | ||
Reverse polarity protection | Yes | ||
Overvoltage protection | Yes; max. 35 V | ||
Input current |
|
| |
from external supply (24 V DC), max. | 0.2 A | ||
Power |
|
| |
Active power input, max. | 4.8 W | ||
Analog inputs |
|
| |
Number of analog inputs | 6 | ||
Designation of the analog input | CH1 ... CH6 | ||
Electrical input frequency, min. | 0 Hz | ||
Electrical input frequency, max. | 96 kHz | ||
Overvoltage strength, min. | -60 V | ||
Overvoltage strength, max. | 60 V | ||
Open-circuit detection | Yes | ||
Short-circuit detection | No | ||
Input ranges |
|
| |
● Voltage | Yes | ||
Input ranges (rated values), voltages |
|
| |
● At DC, min. | -10 V | -20 V | |
● At DC, max. | 10 V | 20 V | |
Input ranges (rated values), currents |
|
| |
● with DC | 0.012 mA | ||
Analog value generation for the inputs |
|
| |
Parameterizable down sampling frequencies | 4 / 8 / 16 / 24 / 48 / 64 / 96 kHz | ||
Sampling frequency, max. | 192 kHz | ||
Integration and conversion time/resolution per channel |
|
| |
● Resolution with overrange (bit including sign), max. | 16 bit | ||
Errors/accuracies |
|
| |
Relative measuring accuracy for analog input **s, min. | -0.5 % | ||
Relative measuring accuracy for analog input **s, max. | 0.5 % | ||
Crosstalk attenuation between analog input **s at 1 kHz | -90 dB | ||
Signal-to-noise ratio for analog input **s | -80 dB | ||
Interfaces |
|
| |
Number of interfaces | 3 | ||
Design of plug-in connection | Connector plug 8-pole (M12) | ||
Transmission rate, max. | 400 Mbit/s | ||
Protocols |
|
| |
Bus protocol/transmission protocol | IEEE 1394a/b | ||
Potential separation |
|
| |
Potential separation analog inputs |
|
| |
● Potential separation analog inputs | Yes | ||
Degree and class of protection |
|
| |
IP degree of protection | IP67 | ||
Standards, approvals, certificates |
|
| |
Certificate of suitability | CE | ||
CE mark | Yes | ||
KC approval | Yes | ||
China RoHS compliance | Yes | ||
Use in hazardous areas |
|
| |
● ATEX | Yes | ||
● IECEx | Yes | ||
Ambient conditions |
|
| |
Ambient temperature during operation |
|
| |
● min. | -40 °C | ||
● max. | 65 °C | ||
Ambient temperature during storage/transportation |
|
| |
● Storage, min. | -40 °C | ||
● Storage, max. | 85 °C | ||
● Transportation, min. | -40 °C | ||
● Transportation, max. | 85 °C | ||
Connection method |
|
| |
Design of electrical connection for supply voltage | Male connector 5-pole (M12) | ||
Design of electrical connection at input | Connector plug 5-pole (M12) | ||
Design of electrical connection for the PE conductor | M4 screw with contact washer | ||
● Connectable conductor cross-section for PE terminal | 2.5 mm² | ||
Mechanics/material |
|
| |
Material of housing | aluminum | ||
Dimensions |
|
| |
Width | 86 mm | ||
Height | 210 mm | ||
Depth | 87 mm | ||
Depth when mounted on DIN rail | 96 mm | ||
Weights |
|
| |
Weight (without packaging) | 1.23 kg | ||
IFN ANALOGINPUT
西门子6GK5208-0BA00-2AF2工业以太网交换机 西门子6GK5208-0BA00-2AF2工业以太网交换机