-
浔之漫智控技术（上海）有限公司
主营：西门子低压电器授权代理商,西门子PLC模块总代理商,西门子模块总代理商,西门子中国一级代理商,西门子PLC一级代理商,西门子DP电缆代理商
浔之漫智控技术（上海）有限公司
主营：西门子低压电器授权代理商,西门子PLC模块总代理商,西门子模块总代理商,西门子中国一级代理商,西门子PLC一级代理商,西门子DP电缆代理商
3
System data |
The most important directives and standards are listed below. These are used as the basis for the SINAMICS S120 built-in units and they must be carefully observed to achieve an EMC-compliant configuration that is safe both functionally and in operation.
European standards | |
|---|---|
EN 61508‑1 | Functional safety of electrical/electronic/programmable electronic safety-related systems |
EN 60204‑1 | Electrical equipment of machines |
EN 61800-3 | Adjustable speed electrical power drive systems |
IEC/EN 61800‑5‑1 | Adjustable-speed electrical power drive systems |
North American standards | |
UL 508C | Power Conversion Equipment |
UL 61800‑5‑1 | Adjustable Speed Electrical Power Drive Systems |
CSA C22.2 No. 14 | Industrial Control Equipment |
Certificates of suitability | |
cULus | Testing by UL (Underwriters Laboratories, //www.) according to UL and CSA standards |
For reliable operation of the drive system, original components of the SINAMICS drive system and the original Siemens accessories as described in this Catalog and the Configuration Manuals, in the functional descriptions or user manuals must be used.
The user must observe the configuring instructions.
Combinations that differ from the configuring instructions (also in conjunction with non-Siemens products) require a special agreement.
If no original components are used, for example, for repairs, approvals such as UL, EN and Safety Integrated can become invalid. This may also result in the operating authorization for the machine in which the non-Siemens components are installed becoming invalid.
All of the certificates of suitability, approvals, certificates, declarations of conformity, test certificates, e.g. CE, UL, Safety Integrated, have been performed with the associated system components as they are described in the Catalogs and Configuration Manuals. The certificates are only valid if the products are used with the described system components, are installed according to the Installation Guidelines and are used for their intended purpose. In other cases, the vendor of these products is responsible for arranging that new certificates are issued.
For further information about configuring a drive system with SINAMICS S120, refer to section Configuration notes.